ALPHA AIR 450

Airborne LiDAR system with built-in IMU, GNSS,

3D scanner and Camera

ADVANCED ACCURACY

Industrial-grade GNSS and high-precision IMU onboard

High accuracy INS is essential to collecting quality LiDAR data, because without it, point cloud would be nothing more than an arbitrary collection of points. It allows the AA450 to provide an absolute accuracy of 5 to 10 cm. With advanced calibration and point cloud optimization technology, the thickness (range noise) of the point cloud is only 30% compared to similar products, which effectively improves the precision of the collected data.

EFFICIENT SCANNING

Long range scanning combined with high resolution imaging

Users will obtain a long-range scanning up to 450 m with a high point's density on the measured surface. At a flying height of 100 m and a velocity of 5 m/s, the AlphaAir 450 (AA450) can deliver around 280 pts/m2 density. The built-in 26 MP high resolution camera has the same FOV width as the Livox LiDAR to provide complete point cloud coverage by RGB colorization.

FLEXIBLE INTEGRATION

Quick installation on any UAV

AlphaAir 450 is ready for direct connection to a DJI M300 via its integrated Skyport. Moreover, it can be installed on CHCNAV's BB4, other multirotor and VTOL UAVs easily. Finally, it can be fitted on any multirotor and fixed wing VTOL drones that can support its weight with dedicated mounts to attach it.

LIGHTEST UNIT IN ITS CLASS

1 kg total weight with LiDAR and camera

The design of the AlphaAir 450 continues to follow the rule - the lighter the unit, the higher the productivity, as the drone can fly longer. As an example, the DJI M300 with the AlphaAir 450 can fly for 30 minutes and collect data covering an area of 2 km2. If users choose the CHCNAV’s BB4 UAV, its endurance with the AlphaAir 450 will reach 55 minutes.